ETAP

We are exporting the metal products as below:

- SEAMLESS STEEL PIPES
We are exporting outside diameter from 6 mm to 406 mm and wall thickness from 1 mm to 50 mm hot rolled seamless steel pipes and cold rolled seamless steel pipes from stocks and from production :

DIN 2448 / 17175 ST 35.8 – 45.8 – 15Mo3

DIN 2448 / 1629 ST 37 – ST 44 – ST 52

DIN 2391 ST 35,ST 45 , ST 52 NBK,BK,BKW,GBK

ASTM A106 Gr A and Gr B All pipes has EN 10204 certificate 3.1 B and/or 2.2
All pipes has EN 10204 certificate 3.1 B and/or 2.2 and sometime we import from stock.

WIRE RODS AND REINFORCING BAR PLAIN DEFORMED
- WIRE RODS IN COILS
Sizes: 5,5-6,35-6,5-7-7,5-8-8,5-9-9,5-10-10,5-11-12
Packing: In coils about 1.500 kgs hydrautically compressed and compacted at four equidistant points with 6mm wire

- REINFORCING BARS-PLAIN & DEFORMED
Sizes: Between 8mm-50mm
Length: Between 6 m or 16 m (Straight or once folded) 6-8-10-12 mm in coils also available
Packing: In piece-counted bundels tied with 8 mm wire on 4 or 6 spots

(depending on the bar length)with minimum 2 ties at least at two points at equal interval

MAINLY PRODUCED QUALITIES
	QUALITY	STANDART
WIRE ROD IN COILS:	SAE 1008-1030	ASTM
	FEE 24	DIN 17100
PLAIN BARS:	SR24,SR30	JIS G 3112
	RST 37-2	DIN 17100
DEFORMED BARS:	GR 60,GR 40	ASTM A 615
	BST 42/50	DIN 488

- WELDED PIPES

- WATER & GAS PIPES
Water & Gas pipes are produced; as light,medium and heavy series,from steel bands(conforming to standarts) by high frequency seam welding.

Production Standarts: DIN 2440-DIN 2441 ; BS 1387 ; ISO 65 ; UNI 8863 ; ASTM A-53 ; NFA 49-145

Galvanising Standarts: DIN 2444 ; BS 1139 ; ASTM A - 795
Therading Standartds:DIN 2999/2986 ; BS 1387 ; ASTM A-53
Tolerance: Thickness ; +%10 , -% 12.5

- INDUSTRIAL PIPES
Industrial pipes are produced;as light,medium and heavy series,from steel bands(conforming to standarts) by high frequency seam welding. These pipes are used in the automotive industry , furniture industry and can be used as scaffold in buildings.

Production Standarts : DIN 2394 ; DIN 2458 ; BS 1139 ; BS 6323 ; NFA 49-541 ASTM A-500
Tolerance: Thickness: +/-%10 Height:Changes according to requirment.

- SQUARE
RECTANGULAR PROFILES
The profiles can be produced at 0.80 mm – 10.0 mm thickness from 10 x 10 to 200 x 200 and 10 x 20 to 350 x 50 by high frequency seam welding
Production Standarts: DIN 2395 ; DIN 59411 ; BS 6363 ; NFA 49-541 ; ASTM A-500
Tolerance: Thickness : +%10 (Can change to standards.)
Cervature: Length x 0.002 Vertical deflection: + 1
Distortion: 2 mm at length and 0.5 mm every m.
Convex:-Concave: Length X (+%1)
Radius: Thickness X 2 (Changes according to standards)
Length : +/- 50 mm(Can change according to standards or requirement)
Weight: +%10 (Changes according to standards)

SPIRALLY WELDED PIPES

PIPES WITH THERMAL INSULATION

BITUMEN COATED PIPES

EPOXY COATED PIPES

POLYETHYLENE COATED PIPES

CONCRETE-LINED PIPES

STAINLESS WELDED STEEL PIPES

- GALVANIZED SHEET
Standart: DIN 17162/59232
Sizes:From 0.20mm X 1000 mm X Coil to 2.00mm X 1000mm/1250mm X Coil and 1000x2000 – 1200x2400mm plate